Chapter 1, Problem 12P

At what depth below the surface of the oil, relative density 0.83 will produce a pressure of 100 kN/m2. What depth of water is this equivalent to? Depth of oil in meters Answer for part 1 Depth of water is this equivalent to Answer for part 2

1. Find the density of an oil filled in the liquid column as shown in figure. Given that absolute pressure at the bottom is 650 kPa, atmosphere pressure is 1.0132 bar. where X=4m; Y = 4m, Z=1m. (Enter only the values in the boxes by referring to the unit given in the bracket. Do not send the hand written answer sheets to my mail) water Mercury The density of the oil = (unit in kg/m) =

1. Find the density of an oil filled in the liquid column as shown in figure. Given that absolute pressure at the bottom is 675 kPa, atmosphere pressure is 1.0132 bar. where X=4m; Y = 4m, Z=1m. (Enter only the values in the boxes by referring to the unit given in the bracket. Do not send the hand written answer sheets to my mail) water oil Mercury The density of the oil = (unit in kg/m³) =

Question 3 Not yet answered Marked out of 3.00 P Flag question 1. Find the density of an oil filled in the liquid column as shown in figure. Given that absolute pressure at the bottom is 700 kPa, atmosphere pressure is 1.0132 bar. where X=4m; Y = 4m, Z=1.5m. water oil Y Mercury The density of the oil = (unit in kg/m³) =

Question 3 A triangular water trough is "a" metres wide and "a" metres deep, as shown in Figure 3. If the trough is filled with water, calculate the magnitude and location of the resultant force acting on the triangular end plates (shaded in grey). The density of water is 1000 kg/m³ (ignore the atmospheric pressure). Use the value of "a" corresponding to the last digit of your SID from Table 1. "a" m "am Figure 3: Triangular water trough a=7

lb The trough below contains a fluid with a specific weight of 54 ft ³ trapezoidal wall below. The measurements are given as follows: A = 3.4 feet B = 2 feet C = 4.9 feet Give your answer in pounds-force. 165 A B Find the total force on the

If the pressure in the air space above an oil (s=0.75) surface in a closed tank is 113 kPa absolute, what is the gage pressure, in kPa, 1 m below the surface? Round your answer to 2 decimal places.

A vertical triangular plate whose height is 4 m. has its base horizontal at the bottom. The difference in level between the center of gravity and the center of pressure shall be 22 cm. What is the base width of the plate i the water surface total hydrostatic force acting on the plate is 76.28 KN. Do not write the unit. You will only input the numerical answer in the space provided. Unit of the Correct Answer: m Decimal Places required in' the final answer: 3

Given that the weight density of water is 9810 N/m3, calculate the fluid force (in Newtons) on a rectangular 1.4m 1.4m flat plate submerged horizontally in water at a depth of 2m. Give your answer correct to two decimal places without the units.