Q2/The slotted arm revolves about a normal axis through point Owith a constant angular velocity w.The path radius of the centerof the pin A varies according to r = 20+ 2sin(nwt)where n is thenumber of lobes = 6 in this case.pin AIf w=12 rad/s, and the spring compression varies from 11.5 Nto 19.1 N, calculate the force R between the cam and the 0.1 kgpin A when it passes over the top of the lobe in the positionshown

Given datar=20+2 sin(n wt)where n= number of lobes=6 in casesw=12 rad/sspring compression 11.5 N to…

The slotted arm revolves about a normal axis through point O with a constant angular velocity w.The path radius of the center of the pin A varies according to r= 20+ 2sin(nwt)where n is the number of lobes = 6 in this case. If w=12 rad/s, and the spring compression varies from 11.5 N to 19.1 N, calculate the force R between the cam and the 0.1 kg pin A when it passes over the top of the lobe in the position shown

The slotted arm revolves about a normal axis through point O with a constant angular velocity w.The path radius of the center of the pin A varies according to r= 20+ 2sin(nwt)where n is the number of lobes = 6 in this case. If w=12 rad/s, and the spring compression varies from 11.5 N to 19.1 N, calculate the force R between the cam and the 0.1 kg pin A when it passes over the top of the lobe in the position shown

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The strings AB and AC connect 500-g mass A to the vertical shaft BC. When the shaft rotates with a constant angular velocity of 15 rad/s, the ball has circular motion in the horizontal plane with the strings having angles of ? = 55° shown in the figure. Find the tension forces at the strings AB and AC.
Q-4) The rod, having a weight of 16N and a length of 2.5m, contains a joint at O which is 0.5m distant from point B. The other end of the rod is attached to a 2,5 m- 0,5 m spring that is compressed by 4cm A with Ks= 250N/cm. At this moment the rod is horizontal. When released; calculate it's angular velocity (passing by the vertical position) and reaction forces at the joint 0.
The strings AB and AC connect 500-g mass A to the vertical shaft BC. When the shaft rotates with a constant angular velocity of 15 rad/s, the ball has circular motion in the horizontal plane with the strings having angles of a = 55° shown in the figure. Find the tension forces at the strings AB and AC. 500g A uui 00t 00 mm
consider the mass and pulley system in the attached file. mass m1 = 29 kg and mass m2 = 12kg. the angle of the inclined plane is given and the coefficient of kinetic friction between mass m2 and the inclined plane is uk = 0.12. assume the pulleys are massless and frictionless what is the acceleration of mass m2 on the inclined plane? take positive acceleration to be up the ramp a2 = ?
A gear of mass m = 10 kg and radius R=0.25 m may rotate about its center of mass C, which is fixed. A rack of mass m = 10 kg is subjected to a constant force Fo = 20 N, as shown. The rack and gear are geared together (gear teeth not shown), so that the force Fo drives the rack to the right and rotates the gear. Find the angular ácceleration a of the gear and find the force f exerted by the rack on the gear. The gear is to be modeled as a uniform circular disc. Fixed Fo3 20 N Rack
2. Consider the 5-1lb bar with length of 2½ feet and width of 2 inches. Small frictionless bearings are mounted to the ends, constraining the motion of the bar to the horizontal x and y slots. The bar starts at rest at positioned at 0= 45°. If an angular acceleration of 3 rad/s² is desired, what moment M must be applied to the bar? What are the reaction forces at A and B at that instant? Additional question: Does the width of the bar matter, or is it appropriate to consider the bar as a slender rod? Consider errors of less than 2% negligible.
The spring-toggle system is in the vertical plane and is held at rest with = 45° when a moment of 12 N-m is applied at point C. In the initial position, the spring, with stiffness of 140 N/m, is stretched 150 mm. Bar AB has a mass of 3 kg, and bar BC has a mass of 6 kg. Find the angular velocity of BC at the moment when = 0. Neglect friction effects. Type here to search ThinkVision Tab Caps Lock Eve Q FI W S 3 F₂ E D 4 F3 R % 5 F4 T F G 6 Y H F$ 7 U F6 8 F7 ( 9 FB Fa F10 F11 F12 - Backspace Enter Print Screen Sya Ra Insert 250 mm Scroll LOCK 00 Delete Home End Pause Break Page Up Page Down A Num Lock 7 Home 250 mm OB 250 mm O 37°F Cloudy 2:12 PM ^4 11/16/2022 Lenovo Polp
Q/ Two Shafts,the axes of which intersect but ave inclined at 28 to each other, are Connected by aHo skes joint. If the driving Shaft has auniform Speed of loo r.pm.The driven Shaft Carries arotuting mass I5 kgrand radius of gyration 250 mm. Find the variation inspeed of the driven shaft and the accelerating torque on the driven Shaft for the position when the driven Shaft has turmed 45°from the position in which its fork end isin the pl ane Containing the two Shafts. Ans-(126.5 r-pim1277N.m).
At the top A of the vehicle moving along line AC in the figureIts speed is 30 m / sec and its weight is 9 kN.Tool radius of curvature 40The reaction force to the tires when reaching point B, which is m,and so that the tires do not separate from the asphalt when it reaches point CWhat should be the radius of curvature of point C? (hA = 6 m andhC = 9 m)
The smooth surface of the vertical cam is defined in part by the curve r = (0.2 cos 0+0.3) m. (Figure 1) Figure Part A 1 of 1 > If the forked rod is rotating with a constant angular velocity of 0 = 4 rad/s, determine the force the cam and the rod exert on the 1.9-kg roller when 0 = 30°. The attached spring has a stiffnesss k = 30 N/m and an unstretched length of 0.1 m. Express your answers in newtons using three significant figures separated by a comma.
The spool has mass, m, and a radius of gyration kG. An inextensible cord is attached to the wall at A. The cord is wound around the radius R and the outer radius 2R. The coefficient of friction between the spool and the ground is mu. What it the critical force, Fcrit (force required to cause motion) applied at point B? If force= 2Fcrit what is the linear acceleration of the center of mass? If force= 2Fcrit what is the tension in cord AC?
A 15-kg uniform disk is placed in contact with the ground and a constant couple moment M = 32 N.m is applied to it as shown. The weight of link AB is negligible. If the coefficient of kinetic friction at D is 0.3, find the angular acceleration of the disk. write the answer in rad/s? but do not write the units. R = 0.25 m A Taylor Answer: