Exercise 1. A mass trailer M, attached to a wall by a spring and a damper with damping coefficient c, slides over a frictionless surface, as illustrated by the Fig. 16. A uniform rigid bar, attached to the trailer by a pin, may oscillate relative to the pivot point, O. Derive the system movement equations under the applied forces F(t) and M(t) indicated in the image. Then obtain the natural frequencies and vibrate modes of the structure, where in this case the free system should be considered not dampened. Suppose the mass has length L and mass m.

Exercise 1. A mass trailer M, attached to a wall by a spring and a damper with damping coefficient c, slides over a frictionless surface, as illustrated by the Fig. 16. A uniform rigid bar, attached to the trailer by a pin, may oscillate relative to the pivot point, O. Derive the system movement equations under the applied forces F(t) and M(t) indicated in the image. Then obtain the natural frequencies and vibrate modes of the structure, where in this case the free system should be considered not dampened. Suppose the mass has length L and mass m.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The motion of a spring-mass-damper system satisfies the initial value problem: d²x m- +bd + kx = F, x(0) = 0; *(0) =1 di? dt Given m = 1 kg, b= 5 Ns/m, k = 4 N/m, and F = 5 N. (a). What is the natural frequency of the system? (b). Is this system under damping or critical damping or over damping? Explain it. (c). Solve the given initial value problem. (d). The location of poles of X(s) affects the behavior of the system. How to choose parameters b/m and k/m so that the poles are placed at - 4+4j?
damping, c Sliding Crate with Bumper Stop A crate of mass m enters a lubricated slide at a loading dock with a velocity v, to the right and an initial position x(0) = x, in the diagram shown above. The sliding motion is lubricated, characterized by a linear damping coefficient C. At a distance x = L the crate contacts a bumper stop characterized by a spring constant k and a damping coefficient c. Numerical values for the system parameters are: C = 8 N-s/m k = 1000 N/m m = 50 kg X = 0 Vo = 5 m/s L= 20 m Ca is to be experimentally determined in completing this assignment Bumper: Assignment 1) Given these parameters, determine the governing dynamic equation for the crate position. 2) Convert the governing equation to state variable form. This requires two first-order equations: a. dv/dt f:(x,v) b. dx/dt = f.(x,v) where f, is a function of the states, x and v. where f, is a different function of the states, x and v. Make two sets of the above equations, one each depending on whether there…
A rail road bumper is designed as a spring in parallel with a viscous damper. What is the bumper's damping coefficient such that the system has a damping ratio of 1.25, when the bumper is engaged by a rail car of 20,000 kg mass. The stiffness of the spring is 200 kN/m. If the rail car engages the bumper, while traveling at a speed of 20m/s, what is the maximum deflection of the bumper? poooo m
Q2\ The period of damped linear oscillation for a certain 1 kg mass is o.32 sec. If the stiffness of the supporting linear spring is 850 N/m, calculate the damping coefficient C and the critical value C, of the motion.
3. A washing machine of mass 70kg operates at 1600 rpm. Find the maximum stiffness of an isolator that provides 80 percent isolation. Assume that the damping ratio of the isolator is 5 percent
1. A .6kg block is hung from a spring with a force constant of 25 N/m. Calculate the displacement of the spring from its equilibrium length, assuming it is hung vertically and neglecting the spring mass. 2. The mass in (1.) is pulled downward by an additional 6 cm and held steady. Calculate the potential energy input corresponding to this additional displacement. 3. Calculate the period of oscillation of the mass/spring system once the object is released. 4. Write an expression for the vertical motion of the system, along the y (vertical) axis, in the form: ?(?) = ? cos(?t) (Use the appropriate values of A and ω in your expression). 5. Calculate the maximum speed of the oscillating object and its maximum kinetic energy. Do your results make sense based off what you got in 2? (I posted all 5 parts but could you answer only 4 and 5? Thank you!)
A force of 20 newton stretches a spring 1 meter. A 5 kg mass is attached to the spring, and the system is then immersed in a medium that offers a damping force numerically equal to 10 times the instantaneous velocity. (a) Let x denote the downward displacement of the mass from its equilibrium position. [Note that x>0 when the mass is below the equilibrium position. ] Assume the mass is initially released from rest from a point 3 meters above the equilibrium position. Write the differential equation and the initial conditions for the function x(t)(b) Solve the initial value problem that you wrote above.(c) Find the exact time at which the mass passes through the equilibrium position for the first time heading downward. (Do not approximate.)(d) Find the exact time at which the mass reaches the lowest position. The "lowest position" means the largest value of x
The motion of a spring-mass-damper system satisfies the initial value problem: (photo attached) Given m = 1 kg, b = 5 Ns/m, k = 4 N/m, and F = 5 N.(a). What is the natural frequency of the system?(b). Is this system under damping or critical damping or over damping? Explain it.(c). Solve the given initial value problem.(d). The location of poles of X(s) affects the behavior of the system. How to choose parameters b/mand k/m so that the poles are placed at - 4 +/- 4 j ?
Mechanical Vibration Lesson A 65 kg industrial sewing machine has an imbalance value of 0.15 kgm in rotation. The machine operates at 125 Hz and is located on the ground with a spring coefficient of 2 x 106 N / m and a dimensionless damping coefficient of 0.12. Find the uniform regime amplitude of the machine.
A mass weighing 16 pounds stretches a spring 83 feet. The mass is initially released from rest from a point 2 feet below the equilibrium position, and the subsequent motion takes place in a medium that offers a damping force that is numerically equal to 1 2 the instantaneous velocity. Find the equation of motion x(t) if the mass is driven by an external force equal to f(t) = 20 cos(3t). (Use g = 32 ft/s2 for the acceleration due to gravity.)
An automobile is found to have a natural frequency of 2 rod per seconds without passengers and 17.32 rod per seconds with passengers of mass 400kg. Find the mass and the stiffness of the automobile by treating it as a single degree of freedom system. Given: Required: Solution: Show complete and detailed solution. Write legibly.
#9: A mass attached to a spring, set in a container of molasses (a thick liquid) acts like a damped simple harmonic oscillator. The mass is 16 kg, the spring has a spring constant of 64 N/m and the molasses provides a damping force of 64 N-s/m. (a) The system is (A) underdamped (B) overdamped (C) critically damped (b) A force of F(t) = -3e-2t (in N) is applied to the mass. If the method of undetermined coefficients is used to find a particular solution, which of the following is the best choice as a trial solution? 1 (c) Initially, at t = 0s, our mass is moving at a speed of 5 m/s as it passes through its equilibrium position (x = 0m). If we are still under the force from part (b), at what positive time, in seconds, does it again pass through x = Om? (If it never does, type dne).