Use Excel or a similar spreadsheet application to calculate the new machine's internal rate of return. (Round answer to 2 decimalplaces, eg. 1.25%)Internal rate of return% Concord Pix currently uses a six-year-old molding machine to manufacture silver picture frames. The company paid $95,000 for themachine, which was state of the art at the time of purchase. Although the machine will likely last another ten years, it will need a$12,000 overhaul in four years. More important, it does not provide enough capacity to meet customer demand. The companycurrently produces and sells 9.000 frames per year, generating a total contribution margin of $92,500.Martson Molders currently sells a molding machine that will allow Concord Pix to increase production and sales to 12,000 frames peryear. The machine, which has a ten-year life, sells for $135,000 and would cost $10,000 per year to operate. Concord Pix's currentmachine costs only $8,000 per year to operate. If Concord Pix purchases the new machine, the old machine could be sold at its bookvalue of $5,000. The new machine is expected to have a salvage value of $19,900 at the end of its ten-year life. Concord Pix usesstraight-line depreciation.Click here to view the factor table.(a)Calculate the new machine's net present value assuming a 14% discount rate. (For calculation purposes, use 4 decimal places asdisplayed in the factor table provided and round final answer to O decimal place, e.g. 58,971)Net present value $

NPV is time value based method of capital budgeting and can be found as the difference in present…

Answered: ently uses a six-year-old molding…

EBK CONTEMPORARY FINANCIAL MANAGEMENT

14th Edition

ISBN:9781337514835

Author:MOYER

Publisher:MOYER

Chapter21: Risk Management

Section: Chapter Questions

Problem 5P

See similar textbooks

Similar questions

Bramble Pix currently uses a six-year-old molding machine to manufacture silver picture frames. The company paid $88,000 for the machine, which was state of the art at the time of purchase. Although the machine will likely last another ten years, it will need a $12,000 overhaul in four years. More important, it does not provide enough capacity to meet customer demand. The company currently produces and sells 11,000 frames per year, generating a total contribution margin of $85,500. Martson Molders currently sells a molding machine that will allow Bramble Pix to increase production and sales to 15,000 frames per year. The machine, which has a ten-year life, sells for $131,000 and would cost $12,000 per year to operate. Bramble Pix's current machine costs only $8,000 per year to operate. If Bramble Pix purchases the new machine, the old machine could be sold at its book value of $5,000. The new machine is expected to have a salvage value of $19,500 at the end of its ten-year life.…
Whispering Winds Pix currently uses a six-year-old molding machine to manufacture silver picture frames. The company paid $108,000 for the machine, which was state of the art at the time of purchase. Although the machine will likely last another ten years, it will need a $8,000 overhaul in four years. More important, it does not provide enough capacity to meet customer demand. The company currently produces and sells 15,000 frames per year, generating a total contribution margin of $102,000.Martson Molders currently sells a molding machine that will allow Whispering Winds Pix to increase production and sales to 20,000frames per year. The machine, which has a ten-year life, sells for $143,000 and would cost $15,000 per year to operate. Whispering Winds Pix’s current machine costs only $8,000 per year to operate. If Whispering Winds Pix purchases the new machine, the old machine could be sold at its book value of $5,000. The new machine is expected to have a salvage value of $20,000 at…
Whispering Winds Pix currently uses a six-year-old molding machine to manufacture silver picture frames. The company paid $ 108,000 for the machine, which was state of the art at the time of purchase. Although the machine will likely last another ten years, it will need a $ 8,000 overhaul in four years. More important, it does not provide enough capacity to meet customer demand. The company currently produces and sells 15,000 frames per year, generating a total contribution margin of $ 102,000. Martson Molders currently sells a molding machine that will allow Whispering Winds Pix to increase production and sales to 20,000 frames per year. The machine, which has a ten-year life, sells for $ 143,000 and would cost $ 15,000 per year to operate. Whispering Winds Pix's current machine costs only $ 8,000 per year to operate. If Whispering Winds Pix purchases the new machine, the old machine could be sold at its book value of $ 5,000. The new machine is expected to have a salvage value of $…
Waterways is considering the replacement of an antiquated machine that has been slowing down production because of breakdowns and added maintenance. The operations manager estimates that this machine still has 2 more years of possible use. The machine produces an average of 50 units per day at a cost of $6.50 per unit, whereas other similar machines are producing twice that much. The units sell for $8.30. Sales are equal to production on these units, and production runs for 260 days each year. The replacement machine would cost $49,800 and have a 2-year life. Given the information above, what are the consequences of Waterways replacing the machine that is slowing down production because of breakdowns? Replacing the machine will result in a net loss of $ . Waterways should keep the old machin
The TechHelp Company produces and sells 7,500 modular computer desks per year at a selling price of $ 600 each. Its current production equipment, purchased for$ 1, 500 ,000 and with a 5-year useful life, is only 2 years old. It has a terminal disposal value of $0 and is depreciated on a straight-line basis. The equipment has a current disposal price of$ 550, 000. However, the emergence of a new molding technology has led TechHelp to consider either upgrading or replacing the production equipment. The following table presents data for the two alternatives:
InteliSystems manufactures an optical switch that it uses in its final product. InteliSystems incurred the following manufacturing costs when it produced 70,000 units last year as shown in the chart below: InteliSystems does not yet know how many switches it will need this year; however, another company has offered to sell InteliSystems the switch for $8.50 per unit. If InteliSystems buys the switch from the outside supplier, the manufacturing facilities that will be idle cannot be used for any other purpose; yet none of the fixed costs are avoidable. Requirements 1. Given the same cost structure, should InteliSystems make or buy the switch? Show your analysis. 2. Now, assume that InteliSystems can avoid $105,000 of fixed costs a year by outsourcing production. In addition, because sales are increasing, InteliSystems needs 75,000 switches a year rather than 70,000 switches. What should the company do now? 3. Given the last scenario, what is the most InteliSystems would be willing to…
Waterways is considering the replacement of an antiquated machine that has been slowing down production because of breakdowns and added maintenance. The operations manager estimates that this machine still has 2 more years of possible use. The machine produces an average of 60.00 units per day at a unit cost of $6.80, whereas other similar machines are producing twice that much. The units sell for $9.00. Sales are equal to production on these units, and production runs for 260 days each year. The replacement machine would cost $71,940 and have a 2-year life. Given the information above, what are the consequences of Waterways replacing the machine that is slowing down production because of breakdowns? Replacing the machine will result in a net loss of $ . Waterways should keep the old i
Waterways is considering the replacement of an antiquated machine that has been slowing down production because of breakdowns and added maintenance. The operations manager estimates that this machine still has 2 more years of possible use. The machine produces an average of 50.00 units per day at a unit cost of $6.80, whereas other similar machines are producing twice that much. The units sell for $9.30. Sales are equal to production on these units, and production runs for 260 days each year. The replacement machine would cost $68,000 and have a 2-year life. Given the information above, what are the consequences of Waterways replacing the machine that is slowing down production because of breakdowns? Replacing the machine will result in a of $ Waterways keep the old
As a result of improvements in product engineering, United Automation is able to sell one of its two milling machines. Both machines perform the same function but differ in age. The newer machine could be sold today for $63,500. Its operating costs are $21,800 a year, but in five years the machine will require a $19,100 overhaul. Thereafter operating costs will be $30,900 until the machine is finally sold in year 10 for $6,350. The older machine could be sold today for $25,900. If it is kept, it will need an immediate $24,500 overhaul. Thereafter operating costs will be $34,000 a year until the machine is finally sold in year 5 for $6,350. Both machines are fully depreciated for tax purposes. The company pays tax at 35%. Cash flows have been forecasted in real terms. The real cost of capital is 13%. a. Calculate the equivalent annual costs for selling the new machine and for selling the old machine. (Do not round intermediate calculations. Enter your answers as a positive value rounded…
InteliSystems manufactures an optical switch that it uses in its final product. InteliSystems incurred the following manufacturing costs when it produced 70,000 units last year: E (Click the icon to view the manufacturing costs.) InteliSystems does not yet know how many switches it will need this year; however, another company has offered to sell InteliSystems the switch for $8.50 per unit. If InteliSystems buys the switch from the outside supplier, the manufacturing facilities that will be idle cannot be used for any other purpose, yet none of the fixed costs are avoidable. Read the requirements. Requirement 1. Given the same cost structure, should InteliSystems make or buy the switch? Show your analysis. Complete an incremental analysis to show whether InteliSystems should make or buy the switch. (Enter a "O" for any zero amounts. Round amounts to the nearest cent. Use a minus sign or parentheses when the cost to buy exceeds the cost to make.) InteliSystems Incremental Analysis for…
WorldSystems manufactures an optical switch that it uses in its final product. WorldSystems incurred the following manufacturing costs when it produced 72,000 units last year: WorldSystems does not yet know how many switches it will need this year; however, another company has offered to sell WorldSystems $11.50 per unit. If WorldSystems buys the switch from the outside supplier, the manufacturing facilities that will be idle cannot be used fe purpose, yet none of the fixed costs are avoidable. E (Click the icon to view the manufacturing costs.) Read the reguirements. Requirement 1. Given the same cost structure, should WorldSystems make or buy the switch? Show your analysis. Complete an incremental analysis to show whether WorldSystems should make or buy the switch. (Enter a "0" for any zero amounts. Round amounts to the nearest cent. Use a minus sign or parentheses when the cost to buy exceeds the cost to make.) World Systems Incremental Analysis for Outsourcing Decision - X Make Buy…
BT&T Corporation manufactures telephones. Recently , the company produced a batch of 600 defective telephones at a cost of $9,000. BT &T can sell these telephones as scrap for $9 each. It can also rework the entire batch at a cost of $6,500 , after which the telephones could be sold for $20 per unit. If BT&T reworks the defective telephones , by how much will its operating income change ?

SEE MORE QUESTIONS

Recommended textbooks for you

EBK CONTEMPORARY FINANCIAL MANAGEMENT

Finance

ISBN:

9781337514835

Author:

MOYER

Publisher:

CENGAGE LEARNING - CONSIGNMENT

Cornerstones of Cost Management (Cornerstones Ser…

Accounting

ISBN:

9781305970663

Author:

Don R. Hansen, Maryanne M. Mowen

Publisher:

Cengage Learning

EBK CONTEMPORARY FINANCIAL MANAGEMENT

Finance

ISBN:

9781337514835

Author:

MOYER

Publisher:

CENGAGE LEARNING - CONSIGNMENT

Cornerstones of Cost Management (Cornerstones Ser…

Accounting

ISBN:

9781305970663

Author:

Don R. Hansen, Maryanne M. Mowen

Publisher:

Cengage Learning

SEE MORE TEXTBOOKS