A reinforced concrete beam of rectangular cross-section, provided reinforcement for moment only is subjected to an ultimate shear force V of 400 kN. The beam size, b = 250 mm, d = 475 mm and material strength fek = 30 N/mm², and fyk = 500 N/mm². Is the beam adequate for shear? 3.5 Design the shear reinforcement for a beam with b = 300 mm, d = 550 mm, V = 150 kN, fek = 25 N/mm², and f = 500 N/mm². A T-beam and slab system of a structure are made of beams spaced at 3.0 m with a clear span of 7.2 m between brickwalls of 250 mm thick. For the T beam he = 100 mm, bw = 300 mm, d = 600 mm. If fek = 35 N/mm² and fyk = 500 N/mm2, design the shear reinforcement. Assume 4H25 tension reinforcements are provided with variable load = 5 kN/m². 3.6

A reinforced concrete beam of rectangular cross-section, provided reinforcement for moment only is subjected to an ultimate shear force V of 400 kN. The beam size, b = 250 mm, d = 475 mm and material strength fek = 30 N/mm², and fyk = 500 N/mm². Is the beam adequate for shear? 3.5 Design the shear reinforcement for a beam with b = 300 mm, d = 550 mm, V = 150 kN, fek = 25 N/mm², and f = 500 N/mm². A T-beam and slab system of a structure are made of beams spaced at 3.0 m with a clear span of 7.2 m between brickwalls of 250 mm thick. For the T beam he = 100 mm, bw = 300 mm, d = 600 mm. If fek = 35 N/mm² and fyk = 500 N/mm2, design the shear reinforcement. Assume 4H25 tension reinforcements are provided with variable load = 5 kN/m². 3.6

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A concrete floor slab 100 mm thick is cast monolithic with concrete beams 2.0 m on centers. The beams have a span of 4.0 m, web width of 250 mm and overall depth of 500 mm. The tensile reinforcement consists of 6 - ø20 mm bars in two rows with 25 mm vertical clear spacing. Use material strength f'c = 21 MPa and fy = 415 MPa. Calculate the following considering a T-geometry: Effective flange width of an interior beam in mm = _______ Depth of uniform stress block at ultimate stage in mm to the neares whole number = _______ Tensile steel strain compatible with concrete strain of 0.003 in 3 decimal places = __________
A concrete floor slab 100 mm thick is cast monolithic with concrete beams 2.0 m on centers. The beams have a span of 4.2 m, web width of 250 mm and overall depth of 450 mm. The tensile reinforcement consists of 4-25 mm diameters bars in two rows with 25 mm vertical clear spacing. Use material strengths f'c = 21 MPa and fy = 415 Mpa. Calculate the following considering a T-geometry: Effective flange width of an interior beam in mm Depth of uniform stress block at ultimate stage in mm to the nearest whole number Tensile steel strain compatible with concrete strain of 0.003 in 3 decimal places
3) A concrete floor slab 100 mm thick is cast monolithic with concrete beams 2.0 m on centers. The beams have a span of 4.2 m, web width of 250 mm and overall depth of 450 mm. The tensile reinforcement consists of 4-∅25 mm bars in two rows with 25 mm vertical clear spacing. Use material strengths f’c = 21 MPa and fy = 415 MPa. Calculate the following considering a T-geometry: Effective flange width of an interior beam in mm = ___________ Depth of uniform stress block at ultimate stage in mm to the nearest whole number = ___________ Tensile steel strain compatible with concrete strain of 0.003 in 3 decimal places = __________
Subject: Reinforced concrete Design- Civil Engineering A simply supported rectangular beam has a width of 300mm and the distance to the centroid of tension reinforcement is 330mm. The tension reinforcement has an area of 2463mm.2 and the area of compression reinforcement placed 70mm from the compression face of the beam is 1231.5mm.2, fy = 415MPa, fc'=30MPa, balanced steel ratio of 0.031.The design strength using 0.90 as the reduction faction is Choices A. 282kN.m B. 245kN.m C. 254kN.m D. 228kN.m
A reinforced concrete T – beam is to be designed for tension reinforcement only. The beam width is 250 mm and the effective depth is 400 mm. The flange thickness is 100 mm and its effective flange width is 900 mm. The applied moment is 300 kN–m. What is the area of tension reinforcement required? use: fc’ = 20.7 MPa and Fy = 414 MPa. * a. 3 983 mm² b. 5 105 mm² c. 2 166 mm² d. 4 094 mm²
a concrete floor slab 100mm thick is cast monotholic with concrete beams 2.0 m on centers. the beams have a span of 4.0m, web width of 259 mm and overall depth of 50 mm. the tensile reinforcement consists of 6-⌀20 mm bars in two rows with 25mm vertical clear spacing. use material strengths f'c=21MPa and fy=415MPa. calculate the ff considering a T-geometry: 1. effective flange width of an interior beam in mm 2. depth of uniform stress block at ultimate stage in mm to the nearest whole number 3. tensile steel strain compatible strain of 0.003
Design the simply supported beam shown in the Figure 1 for flexure Consider the following data. Characteristic compressive strength of concrete, fck= 25 N/mm? %3D Characteristic tensile strength of steel, fyk = 500 N/mm? Effective cover to reinforcement is 30 mm Density of Block work = 20 kN/m3 Draw the cross section of the beam at the mid span Height of 200 mm thick wall above the beam is 4 m 200 mm - Imposed Load-20kN/m 600 mm - 6 m
SITUATION 8: A rectangular concrete beam having a width of 300 mm is reinforced for tension only. The beam carries a factored moment of 540 kN-m. Concrete strength is f’c = 28 MPa and steel yield strength fy = 280 MPa.25. Which of the following most nearly gives the balanced steel ratio? a. 0.0349 b. 0.0439 c. 0.0394 d. 0.0493 26. Which of the following most nearly gives the minimum effective depth using a steel ratio equal to half the 582.50 sqm balanced steel ratio? a. 611.15 mm b. 675.38 mm c. 640.91 mm d. 582.50 mm27. Which of the following most nearly gives the minimum effective depth using the maximum steel ratio permitted by the code? a. 541.20 mm b. 497.21 mm c. 568.18 mm d. 518.67 mm
A reinforced concrete beam has a width of 300 mm and an effective depth of 618 mm. Compressive reinforcement will be placed at d' = 60 mm, f'c = 28 MPa and fy = 415 MPa. Use Ø = 0.9 for flexure and load combination of U= 1.2DL + 1.6LL. Reference: NSCP 2015. a. Calculate the steel ratio for a balanced section, phal- b. Calculate the maximum steel ratio for a tension-controlled section, pmax. d. c. If the beam is to support a bending moment of 240 kN-m from dead load and 195 kN-m from live load, determine the required design flexural strength of the section. If the beam is to support a bending moment of 240 kN-m from dead load and 195 kN-m from live load, determine the number of 28 mmø bars required as tension reinforcement.
A rigid steel plate is supported by three posts of high-strength concrete each having an effective cross-sectional area A = 40,000 mm2 and length L = 2 m (see figure). Before the load P is applied, the middle post is shorter than the others by an amount s = 1.0 mm. The allowable compressive stress in the concrete is 20 MPa and E of concrete is 30 GPa. What is the minimum load P (kN) needed to close the gap? P S
A rectangular beam 200 mm wide has an effective depth of 350 mm. It is subjected to a bending moment of 24,000 Nm. The permissible stresses are c = 5 N/mm², t = 140 N/mm²; and m is 18. The required area of tensile reinforcement will be.
The total compressive force at the time of failure of a concrete beam section of width 'b' without considering the partial safety factor of the material is (a) 0.36 fok b Xu (c) 0.66 fok b Xu (b) 0.54 f b Xu (d) 0.8 f b X, ck where X, is the depth of neutral axis, f cube strength of concrete. ck