4. An electric scooter company considers choosing a DFM approach with modulararchitecture with the following modulesThree different electric motorsFour different framesTwo different panelsa. How many combinations can be configured from nine modules? Explain yourcalculationb. However, the company starts giving priority to maintainability over the developmentprocess. Which approach shall the company consider? Why?c. Later the company changes its plan and prioritizes environment over maintainability.Which approach shall the company consider and why?

The 20 years of electric scooter manufacturing experience hydo Sports is one of the best electric…

4. An electric scooter company considers choosing a DFM a architecture with the following modules Three different electric motors . " Four different frames Two different panels . a. How many combinations can be configured from nine r calculation b. However, the company starts giving priority to maintainability process. Which approach shall the company consider? Why? c. Later the company changes its plan and prioritizes environme

4. An electric scooter company considers choosing a DFM a architecture with the following modules Three different electric motors . " Four different frames Two different panels . a. How many combinations can be configured from nine r calculation b. However, the company starts giving priority to maintainability process. Which approach shall the company consider? Why? c. Later the company changes its plan and prioritizes environme

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

How do you do Routh Houritz criteria? What is a method that always works? Like how apply to below?
DA stamping device is used for work on sheet metal work piece. The puncher that moved by double acting cylinder (DAC- A) with sp stamp the sheet metal and lefur retracted back to its position. While the sheet metal inside the blank will push out using another DAC- B and retracted back with Spring return ) Design an Pneumatic-PLC circuit by using 5/2 way valve.
Find all types of power losses (the second photo shows the types of power losses) The weight of the car is 800 Kg The weight of each person is 75 Kg You may assume any missing parameters you need in the design appropriately (e.g., the rolling-resistance-power, air-resistance-power, the DC motor's parameters, ....etc)
What are the advantages of using trans- formers and transformer rectifiers vice inverters and dynamotors for supplying air- craft power? What power system requirements do modern naval aircraft have?
The following information is given for a 300kW, 600V, long shunt compound DC generat or, shunt field resistance is 75 ohms, armature resistance 0.01, brush resistance is 0.011 ohrms, series field resistance is 0.012 ohms and the divert or resistance of 0.036 ohms.When the machine is delivering full load; a. Draw the circuit diagrarn b. Calculate the voltage and C Power generated by the armat ure.
Two gen. A and B operate in parallel. The station capacity of A is 50MW and that of B is 25MW. The full load speed regulation of station A is 3% and of B is 3.5%. Find the load sharing of 50MW between both the machine and the no load frequency is 50Hz. Don't use pen and copy.
Q2: Correct the wrong statement if any: 1-The series filed of a series dc generator is excited by armature current. 2- The developed power in DC generator armature is function to load current. 3-The commercial efficiency of DC generators is relationship between output mechanical power and developed power in armature winding. 4- If the source frequency subjected to primary windings increased, the iron losses also decreased. 5-In transformers short circuit test primary voltage will be greater than secondary voltage.
Q4/ Chose the correct answer for the following 1. In BLDC motor field winding is kept on a) Stator b) Rotor c) Can be placed anywhere d) Absent 2. By electronic circuitry BLDC can be controlled for both constant and variable torque operation. a) True b) False 3. In medical fields which DC motor is widely used? a) PMDC b) BLDC 4. Construction of BLDC is exactly similar to the a) Conventional DC motor c) Permanent magnet synchronous motor b) Induction motor 5. Typical brushless motor doesn't have a) Commutator b) Permanent magnet 6. The sensor most commonly used in the BLDC motor is a) Thermo Sensor b) Relay Sensor c) Brushed DC motor d) Cannot be determined d) Totally different construction c) Electronic controller d) Fixed armature c) Hall Sensor d) Power Sensor
2- At no-load the power input to transformer equal to 3- The value of resistance between primary and secondary winding practically equal to 4- The power losses its difference between mechanical power and power developed in armature winding. 5- If the armature resistance Ra increases, the Emf will Q2: Correct the wrong statement if any: 1-The series filed of a series de generator is excited by armature current. 2- The developed power in DC generator armature is function to load current. 3-The commercial efficiency of DC generators is relationship between output mechanical power and developed power in armature winding. 4- If the source frequency subjected to primary windings inereased, the iron losses also decreased. 5-In transformers short circuit test primary voltage will be greater than secondary voltage. GOOD LUCK
5. Two shunt generators A and B operate in parallel and their load characteristics may be taken as straight lines. The voltage of A falls from 240 V at no-load to 220 V at 200 A, while that of B falls from 245 V at no-load to 220 V at 150 A. Determine the current which each machine supplies to a common load of 300 A and the bus-bar voltage at this load.
Q3/ A/ Compare between de series and shunt generator. Q3/ B/ Briefly explain the commutating process in dc machine.
Discuss motherboard power delivery systems, including voltage regulators and phases. How do they impact system stability and overclocking capabilities?