10.0 m200 m2. An old western town has a water tower to deliver water to the residents. Pictured above is the watertower. The water tower is closed but there is a section of air that is atmospheric pressure just above thewater. The corsss ectional area at point 2 is 4.75 x 10 m. The cross sectional area fot the water toweris very large. What is the speed of the water coming out of the pipe at point 2? (density of water =kg/m³)3. On a vacation trip up in Oregon my boys decided to build a 10 kg raft that they made out of driftwood.1000

Note: Since you have asked multiple question, we will solve the first question for you. If you want…

10.0 m A 200m 2. An old western town has a water tower to deliver water to the residents. Pictured above is the water tower. The water tower is closed but there is a section of air that is atmospheric pressure just above the water. The corsss ectional area at point 2 is 4.75 x 102 m². The cross sectional area fot the water tower is very large. What is the speed of the water coming out of the pipe at point 2? (density of water = 1000 kg/m³)

10.0 m A 200m 2. An old western town has a water tower to deliver water to the residents. Pictured above is the water tower. The water tower is closed but there is a section of air that is atmospheric pressure just above the water. The corsss ectional area at point 2 is 4.75 x 102 m². The cross sectional area fot the water tower is very large. What is the speed of the water coming out of the pipe at point 2? (density of water = 1000 kg/m³)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The figure below shows a gasoline storage tank with cross-sectional area Asub1, filled to a depth h. The space above the gasoline contains air at pressure psub0, and the gasoline flows out the bottom of the tank through a short pipe with cross-sectional area Asub2. Derive expressions for the flow speed in the pipe and the volume flow rate. Thank you!
A pump is installed in a pipe system, where at the suction side 1.0 m below the pump, an open manometer reads a vacuum of 20 cm of mercury. The pipw is 10 cm in diameter and the flow is 35 L/s of water. Find the total energy at the location of the manometr, relative to a datu, through the pump. a.2.74 m.b.2.56 m.c.-4.67 m.d.-2.72 m.
Include a free body diagram A pump is installed in a pipe system, where at the suction side 1.0 m below the pump, an open manometer reads a vacuum of 20 cm of mercury. The pipe is 10 cm in diameter and the flow is 35 L/s of water. Find the total energy at the location of the manometer, relative to a datum, through the pump. A. 12.74 m B. -4.67 m C. 2.56 D. -2.72 m
If a liquid enters a pipe of diameter d with a velocity, v. what will irs velocity at the exit be if the diameter reduces to 0.5d?
Liquid water is flowing at a rate of 25 gpm in a pipe. At one end of the pipe, the internal diameter is 2-in and the gauge pressure is 10psig, and at the discharge end 20ft away horizontally, the water discharges into the atmosphere through a 3.5-in ID pipe. Find the friction in ft of water.
A pump is installed in a pipe system, where at the suction side 1.0 m below the pump, an open manometer reads a vacuum of 20 cm of mercury. The pipe is 10 cm in diameter and the flow is 35 L/s of water. Find the total energy at the location of the manometer, relative to a datum, through the pump. A. -4.67m B. 12.74m C. -2.72m D. 2.56
How much will an air leak cost during three monthes? the hole has a diameter 6.35mm at line pressure 690 kPa, use the cost of electricity 7 cents per kWh.
4. The circular tank of water is being filled from a pipe shown in figure below. The velocity of flowof water from the pipe is 10 ft/s. What will be the rate of rise ( in ft/s) of the water surface in the tank?
Q1) Using a system similar to that shown in figure, if air pressure p = 50 kPa., and the depth h1 = 0.3 m, compute the water flow from side nozzle of diameter (d = 10 mm) and the rise h₂ from that nozzle. vesn Air pressure It, 11₂ Nozzle
2. Oil (sg=0.90) is flowing at 150 L/min through a turbine. The pressure before the turbine is 750 kPa and after the turbine 150 kPa with an elevation between these two points of 2.3 m [ fluid entrance is on the high side ]. If the friction loss in the system is 5.10 N.m/N find (a) the power delivered to the turbine by the fluid and (b) If the mechanical efficiency of the turbine is 80 % find the power output from the turbine.
For the figure shown below, the pressure at Point 1 is 150 kN/m and at Point 2 is 190 kN/m. Find the velocity (v). Pitot tube Piezometer - Pipe Water in Water out 1 2
Find the force required to hold the blade in position, if the jet weight (100kg) and discharge (4001/sec) Air 25 kPa Blade Water 3m 65 Jet W