. Two identical cylinders are applied in series as shown in Fig.2. The cylinder piston and rod diameters are 80 mm and 40 mm respectively. The valve is working in position 2. Assuming the tank pressure is 1Bar. . In order to lift the mass 3000 kg in velocity of 0.1m/s, how much pressure in MPa are needed from the motor? • How much volume in liter/min are needed from the motor?

. Two identical cylinders are applied in series as shown in Fig.2. The cylinder piston and rod diameters are 80 mm and 40 mm respectively. The valve is working in position 2. Assuming the tank pressure is 1Bar. . In order to lift the mass 3000 kg in velocity of 0.1m/s, how much pressure in MPa are needed from the motor? • How much volume in liter/min are needed from the motor?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Patm 1. Initially; the piston sits on the stops and the linear spring exerts no force, the specific volume is 0.05 m /kg and the pressure is 125 kPa. Atmospheric pressure is 100 kPa, mass of the piston is 102 kg, and area of the piston is 200 cm?. The linear spring exerts a force on the piston in such a way that the specific volume becomes 0.08 m'/kg when the pressure reaches 200 kPa. Heat is transferred to the water until its temperature is 115 °C. Calculate work and heat transfer, showing the process on a P-v plot. Hint: In the final stage, the temperature is 115°C, but the pressure is not given. You need to find P and v using the tables and P-v plot.
A surface condenser deals with 12000 kg of steam per hour. Air leakage into the condenser is found to be 4 kg/hr. The vacuum and temperature at the air pump suction are 700 mm of Hg and 36°C respectively. The barometric pressure is 760 mm Hg. Compute the volumetric capacity in m'/min of wet air pump.
What size pump is needed to supply 10 gpm to a cylinder when the electric motor is rotating at 1725 rpm? Assume 100% efficiency and state your answer in in3/rev to two decimal places.?
It is said that independent temperatures are held at 273 K in a volume of 11.35 dm3, and its capacity of molar heat at 29.4 J K^-1 mol^-1 Cp. If the constant temperature 273 K is reversely compressed to it’s half volume. a. What has changed with the U of the gas? b. What is the gas's final pressure. c. Compute the work done to it’s system? d. How much heat does the system flow out e. Gas change in H?
1. A water manometer attached to a pitot static tube used to measure air velocity shows a reading of 0.1 m. Assuming the coefficient of velocity as 0.98 and the density of air as 1.2 kg/m3, calculate the air velocity.
Task 2 A frictionless piston fitted inside a cylinder containing gas at a pressure of 200 kPa, volume of 1 liter and temperature of 25 ° C. Choose one gas from Task 1, the gas is to be compressed in the system and the final volume is 0.5 liter. Work is done to move the piston and heat is transferred to the cooling system around the cylinder. Illustrate the importance of expressions for work done in thermodynamic processes by applying first principles while calculating the work done when the expansion is ADIABATIC, ISOTHERMAL and POLYTROPIC for different n= (1.2, 1.3, 1.4, 1.8, 1.9). Discuss the effect of varying n on the calculated boundary work.
The bottom quarter of a vertical cylindrical tank of total height 0.4 m and diameter is filled with a liquid (SG>1, like glycerin) and the ret with water. The tank is now rotated about its vertical axis at constant angular speed w. Determine the value of angular speed in rad/s when point P on the axis at the liquid-liquid interface touches the bottom of the tank. Include the free body diagram in your solution. a.12.1 b.10.3 c.14.4 d.13.2
The question is important, Answer it correctly. 1. A ventilation fan is moving 3,200 cfm with a fan static pressure of 8.30" wg. The airflow is increased to 3,500 cfm by increasing the fan speed. What is the new static pressure of the fan?
Find the T.F for the system below x (Output) ww ww (Input force) No friction
2. Determine the water horsepower and the mechanical efficiency of a centrifugal water pump which has an input of 2611 watts, if the pump has an 8 in.nominal size suction and 6 in.nominal size discharge and handles 150 gpm of water at 150 deg.F (specific volume is 0.01634 ft3/Ibm). The suction line gage shows 4 in.Hg vacuum, and the discharge gage shows 26 psi. The discharge gage is located 2 ft above the center of the discharge pipe line and the pump inlet and discharge lines are at the same elevation.
Home work/1: A fan with 24-in-diameter blades moves 2000 cfm (cubic feet per minute) of air at 70°F at sea level. Determine (a) the force required to hold the fan and (b) the minimum power input required for the fan. Choose a control volume sufficiently large to contain the fan, with the inlet sufficiently far upstream so that the gage pressure at the inlet is nearly zero. Assume air approaches the fan through a large area with negligible velocity and air exits the fan with a uniform velocity at atmospheric pressure through an imaginary cylinder whose diameter is the fan blade diameter?
There are two double-acting pneumatic actuators, the extension of each one is executed in 5 seconds at 80 psi and recoil in 4 seconds at 30 psi, the travel of both is 12 inches, the diameter of the piston is dp = 4 "and of the rod dv = 1"a) Determine the compression ratios. The local atmospheric pressure is 79kpa = (11.5 psi)b) Determine the air consumption in cubic feet per minute of free air PCMc) Determine the average air consumption for each.d) Propose the regulation values of the pressure switch, system pressure and safety valve